• Dripless DC600 Dual Component Adhesive Applicator, 22 oz. Dual Cartridge Capacity, 26:1 Thrust Ratio; 1:1 or 2:1 Mix Ratio
Dripless DC600 Dual Component Adhesive Applicator, 22 oz. Dual Cartridge Capacity, 26:1 Thrust Ratio; 1:1 or 2:1 Mix Ratio

Dripless DC600 Dual Component Adhesive Applicator, 22 oz. Dual Cartridge Capacity, 26:1 Thrust Ratio; 1:1 or 2:1 Mix Ratio

SKU:HACQ84HV2
Sale price
£110.00
Regular price
£182.00
Unit price
per 
( 39% off )
Quantity:
Expected Delivery: 21-28 days

Tracked Shipping

Secure Payments

10 Days Return

Tracked Shipping

Secure Payments

10 Days Return

  • Dual-component epoxy applicator for 22 oz. dual cartridges in a 1:1 or 2:1 mix ratio
  • Thrust ratio of 26:1 for use with very high viscosity materials
  • Each pull of the trigger advances the cartridges by 3.5 mm
  • Steel gripper plates and push disc provide durability
  • Adjustable screw that cuts thrust gaps provides bead control

Customer Reviews

For refurbished, this was great Had I not already known I was purchasing a refurbished tool I would have thought it was brand new from its appearance out of the box. Looked and performed excellently. What more can you ask for in a tool? 5Heavy gauge steel This seems to be a good quality applicator. I only needed it for one job, to apply BMW structural foam (epoxy) to my 2003 M3 which had the well documented E46 Subframe Mount problem. Upon receipt of the applicator, I tried to move the adjustable plunger to the 2:1 position, but could not get the rod through the hole. I had to use a drill to clear some of the paint from the hole,so the rod would go through. Once I had it set in 2:1 mode, I tried inserting a cartridge. There were two issues with the fit on my cartridges. The first issue was that the slot in the applicator where the nozzle passes through did not fit. The slot was too narrow. Additionally the metal plate had a slight, curved ridge which I suspect was intended to enhance it rigidity. The result was that I could not instal my cartridge such that the head of the tubes would fit flush against the plate. I had to build a shim using 1/4" plywood. The second issue was that the clip-on side supports which were provided with the applicator would not fit. These supports were intended to be used in 2:1 mode to provide contact and stability for the smaller of the two tubes in the cartridge. Luckily, the cartridge did not move or buckle without them.With all that said, with slight modification the product did what I needed it to do and it did it at a far lower cost than other products I found. 4Dual Cartridge gun works as intended This gun works as intended and serves it's designed purpose. I would buy again. 5falls short You're stuck with a single size tube because they don't include any adapters for the plungers. You can unscrew them and make your own I guess. What a hassle. 4Very good heavy duty caulking gun Fantastic heavy duty double barreled caulk gun.It's made for two part epoxy adhesive.I tried the single tube epoxy but the barrier between the parts failed and some of the epoxy hardened and destroyed my gun. 5Well made tool. Pricey, but worked well dispensing Wej-it two part epoxy. Fits 600ml cartridge. No instructions included with tool. 5sturdy but not heavy Hands on, the sweetest caulk gun of any sort I've ever seen, let alone owned. Smooth precise trigger action, sturdy but not heavy, and converts from 1:1 to 2:1 ratios of your favorite two-part goo. I purchased this gun to insert structural urethane foam into the voids of my unibody car. It was less than half the price of other industry standard units. Works fine with the Sulzer-Mixpac 600ML cartridges. 5Excellent tool - perfect for Simpson ETI-SLV and ETI-LV epoxy applicator tubes This is a very well designed and very well built specialty tool that seems perfectly suited for use with Simpson StrongTie dual epoxy applicator tubes, such as Simpson Strong-Tie ETI-LV 22oz and Simpson Strong-Tie ETI-SLV 16oz dual component epoxy for use in filling small cracks in concrete.The tool is welded very well and has adjustable tube holder adapters and two sizes of plunger disks for the two sizes of applicator tubes. 5Great tool at a good price A very solidly made tool at a fraction of the price of Simpson-Strong tie's equivalent. The tube stops dripping when the release tab is pulled - seems obvious that it should, but not all adhesive guns I've had work well in that area.On a side note, I used this with a single tube of Simpson Strong-Tie SET-XP to epoxy in 14 #4 rebars in 5/8" holes, 8" deep. The quantity of adhesive needed was almost perfect with only ~1/10th of the tube remaining. The short tube spacers need to be removed when using the SET-XP tubes. 5Release sticks, works well other than that. Works well but lever to release pressure sticks making it a bit difficult to stop flow between uses. Hoping that gets better with use. Very sturdy construction but expected easier use for money spent as seems to be well made (sturdy). 3
See All Reviews
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.uk, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Description
  • Dual-component epoxy applicator for 22 oz. dual cartridges in a 1:1 or 2:1 mix ratio
  • Thrust ratio of 26:1 for use with very high viscosity materials
  • Each pull of the trigger advances the cartridges by 3.5 mm
  • Steel gripper plates and push disc provide durability
  • Adjustable screw that cuts thrust gaps provides bead control
Reviews

Customer Reviews

For refurbished, this was great Had I not already known I was purchasing a refurbished tool I would have thought it was brand new from its appearance out of the box. Looked and performed excellently. What more can you ask for in a tool? 5Heavy gauge steel This seems to be a good quality applicator. I only needed it for one job, to apply BMW structural foam (epoxy) to my 2003 M3 which had the well documented E46 Subframe Mount problem. Upon receipt of the applicator, I tried to move the adjustable plunger to the 2:1 position, but could not get the rod through the hole. I had to use a drill to clear some of the paint from the hole,so the rod would go through. Once I had it set in 2:1 mode, I tried inserting a cartridge. There were two issues with the fit on my cartridges. The first issue was that the slot in the applicator where the nozzle passes through did not fit. The slot was too narrow. Additionally the metal plate had a slight, curved ridge which I suspect was intended to enhance it rigidity. The result was that I could not instal my cartridge such that the head of the tubes would fit flush against the plate. I had to build a shim using 1/4" plywood. The second issue was that the clip-on side supports which were provided with the applicator would not fit. These supports were intended to be used in 2:1 mode to provide contact and stability for the smaller of the two tubes in the cartridge. Luckily, the cartridge did not move or buckle without them.With all that said, with slight modification the product did what I needed it to do and it did it at a far lower cost than other products I found. 4Dual Cartridge gun works as intended This gun works as intended and serves it's designed purpose. I would buy again. 5falls short You're stuck with a single size tube because they don't include any adapters for the plungers. You can unscrew them and make your own I guess. What a hassle. 4Very good heavy duty caulking gun Fantastic heavy duty double barreled caulk gun.It's made for two part epoxy adhesive.I tried the single tube epoxy but the barrier between the parts failed and some of the epoxy hardened and destroyed my gun. 5Well made tool. Pricey, but worked well dispensing Wej-it two part epoxy. Fits 600ml cartridge. No instructions included with tool. 5sturdy but not heavy Hands on, the sweetest caulk gun of any sort I've ever seen, let alone owned. Smooth precise trigger action, sturdy but not heavy, and converts from 1:1 to 2:1 ratios of your favorite two-part goo. I purchased this gun to insert structural urethane foam into the voids of my unibody car. It was less than half the price of other industry standard units. Works fine with the Sulzer-Mixpac 600ML cartridges. 5Excellent tool - perfect for Simpson ETI-SLV and ETI-LV epoxy applicator tubes This is a very well designed and very well built specialty tool that seems perfectly suited for use with Simpson StrongTie dual epoxy applicator tubes, such as Simpson Strong-Tie ETI-LV 22oz and Simpson Strong-Tie ETI-SLV 16oz dual component epoxy for use in filling small cracks in concrete.The tool is welded very well and has adjustable tube holder adapters and two sizes of plunger disks for the two sizes of applicator tubes. 5Great tool at a good price A very solidly made tool at a fraction of the price of Simpson-Strong tie's equivalent. The tube stops dripping when the release tab is pulled - seems obvious that it should, but not all adhesive guns I've had work well in that area.On a side note, I used this with a single tube of Simpson Strong-Tie SET-XP to epoxy in 14 #4 rebars in 5/8" holes, 8" deep. The quantity of adhesive needed was almost perfect with only ~1/10th of the tube remaining. The short tube spacers need to be removed when using the SET-XP tubes. 5Release sticks, works well other than that. Works well but lever to release pressure sticks making it a bit difficult to stop flow between uses. Hoping that gets better with use. Very sturdy construction but expected easier use for money spent as seems to be well made (sturdy). 3
See All Reviews
Return And Refund Policy
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.uk, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Delivery Policy
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.

Recently Viewed

BACK TO TOP